Areas of Concentration
ECE majors must select a minimum of four upper-level courses in at least two areas of departmental areas of concentration, with no less than two courses in one of the elected areas. For students expecting to enter the engineering profession after graduation, a two-course or three-course sequence prepares the student for professional work in that area of concentration. For all students, including those expecting to enter fields such as medicine, law, or business management, these upper-level courses reinforce the broad relevance of the powerful problem-solving methodologies of engineering and illuminate enabling technologies for breathtaking applications of technology.
Some concentration areas have a foundation course identified in bold (e.g., ECE 340(122) in Photonics). If two or more courses are taken in such a Concentration Area, the Foundation Course for that area must be taken. The Solid State Devices and Integrated Circuits area has two foundation courses, either one of which will satisfy this requirement.
There are five areas of concentration with more detail and associated courses below.
- Computer Engineering and Digital Systems
- Signal Processing, Communications, and Control Systems
- Solid-State Devices and Integrated Circuits
- Electromagnetic Fields
Note: Current course numbers are shown followed by former course numbers in parentheses (...). Prerequisite courses are indicated by square brackets [...].
Computer Engineering and Digital Systems
The discipline concerned with the operation and design of computers and computer-based systems. Although analog computers, in which electrical signals directly represent physical quantities, were historically important in the development of modern computers (and continue to be used in some systems), digital computers are today predominant and are the primary focus of the computer engineering effort in the Department of Electrical and Computer Engineering in the Pratt School. The Computer Engineering curriculum begins with a course in logic design which studies the binary language of digital systems, and the means for manipulating and storing ones and zeroes to accomplish useful functions. Students can then study computer architecture (how modern computers work, and how to design them), computer networking, VLSI chip design, and other advanced topics. Computer engineering interfaces strongly with many other areas of electrical engineering (electronics, electromagnetics, signal processing, and control theory) as well as with computer science.
The Digital Systems curriculum is a set of advanced courses in the Computer engineering curriculum; it assumes that students have mastered the material in the two prerequisite courses ECE 250L(52L) and ECE 350(152).
- FOUNDATION COURSE - ECE 350L Digital Systems (Sp) [ECE 250 & COMPSCI 201(100)] - Note: for those who took ECE 52L Digital Systems, the Foundation Course is ECE 152 Intro to Computer Architecture (taught as ECE 496.04 in Sp13)
- ECE 253(153) Intro to Operating Systems (C/L COMPSCI 210(110))(F, Sp) [COMPSCI 250(104) or ECE 250 or (ECE 152)]
- ECE 358(150) Introduction to Computer Networks (C/L COMPSCI 310(114))(Sp)[COMPSCI 308(108) and COMPSCI 210(110) or equivalent]
- ECE 356(156) Computer Network Architecture (F) [ECE 250L(52L)]
- ECE 459(154) Introduction to Embedded Systems (F) [ECE 350L(152)]
- ECE 534(264) CAD for Mixed-Signal Circuits (F) [ECE 331L(163L)]
- ECE 536(266) Synthesis & Verification of VLSI Systems (F) [ECE 350L(52L)]
- ECE 538(269) VLSI System Testing (Sp) [ECE 350L(52L)]
- ECE 539(261) Full Custom VLSI Design (F) [ECE 350L(52L) and ECE 331L(163L)]
- ECE 552(252) Advanced Computer Architecture I (F) [COMPSCI 250(104) or ECE 250L(152)]
- ECE 554(254) Fault-Tolerant and Testable Computer Systems (F) [ECE 250L(152) or COMPSCI 250(104)]
- ECE 555(255) Probability for Electrical and Computer Engineers (F) [MATH 216(107)]
- ECE 556(256) Wireless Networking and Mobile Computing (Sp) [ECE 356(156) or COMPSCI 310(114) or Instructor Permission]
- ECE 557(257) Performance and Reliability of Computer Networks (Sp) [ECE 356(156) and ECE 555(255)]
- ECE 558(250) Computer Networks and Distributed Systems (C/L COMPSCI 514(214))(F)
- ECE 559(251) Advanced Digital System Design (Sp) [ECE 230L(51L) and 350L(52L)]
- ECE 590(299.03) Nanocomputing (Sp 2007, Sp 2012) [ECE 250L(152) or COMPSCI 250(104)]
- ECE 652(259) Advanced Computer Architecture II (Sp) [COMPSCI 550(220) or ECE 552(252)]
Signal Processing, Communications, and Control Systems
The disciplines concerned with representing, storing, interpreting, and transmitting information in systems of finite capacity in the presence of interference and noise; with extracting information from speech, image, video, radar, sonar, and medical data signals; and with using information, including feedback information comparing actual and desired system states, for controlling, shaping and stabilizing system performance in the presence of noise, delay, and inertia. Applications include telecommunications, intra- and inter-system communications, remote sensing, imaging, robotics, feed-back stabilized electronics, and the remote control of electro-mechanical systems, both large and small.
- ECE 381(180) Fundamentals of Digital Signal Processing (F) [ECE 280L(54L) and one of STA 130(113), MATH 230(135), ECE 380, or ECE 555(255)]
- ECE 382(141) Linear Control Systems (Sp; Su) [ECE 280L(54L)]
- ECE 483(184) Introduction to Digital Communication Systems (Sp) [ECE 280L(54L) and one of STA 130(113), MATH 230(135) or ECE 555(255)]
- ECE 485 Digital Audio and Acoustic Signal Processing (Sp) [ECE 280L(54L)]
- ECE 486(186) Wireless Communications Systems (F) [ECE 280L(54L) and one of STA 130(113), MATH 230(135) or ECE 555(255)]
- ECE 488(189) Digital Image and Multidimensional Signal Processing (Sp) [ECE 280L(54L) and one of STA 130(113), MATH 230(135) or ECE 555(255) or permission of instructor]
- ECE 495(195) Biological Signal Processing (F12 and F13) [ECE 280L(54L); one of STA 130(113), MATH 230(135) or ECE 555(255); and BIOLOGY 201L(25L) or 147; or permission of the instructor]
Solid-State Devices and Integrated Circuits
This area is concerned with the properties and manufacture of building-block devices (diodes, transistors, lasers) used in integrated circuits (IC's) to build electronic and photonic systems, and with their integration into circuits. Example applications include: digital computer components (CPUs, RAM, CDROM), telecommunications equipment components (parts essential for cell phones, digital switches, modems), and displays, which underlie a large array of consumer products (televisions, CD players, VCR's etc). It also encompasses the burgeoning field of microelectromechanical, micromechanical and microfluidic devices made possible by the fabrication techniques underlying integrated circuit manufacture.
- FOUNDATION COURSE - ECE 330(162) Microelectronic Devices (F) [ECE 230L(51L)] or
- ECE 331L(163) Integrated Circuits (Sp) [ECE 230L(51L)] Note: Either may be taken as the Foundation Course; if both courses are taken, they both count as Concentration Courses.
- ECE 526(216) Devices for Integrated Circuits (F) [ECE 330(162)]
- ECE 527(217) Analog Integrated Circuits (Sp) [ECE 526(216)]
- ECE 528(218) Integrated Circuit Engineering (Sp) [ECE 330(162) or ECE 331L(163L)]
- ECE 529(219) Digital Integrated Circuits (Sp) [ECE 330(162) and ECE 331L(163L)]
- ECE 539(261) Full Custom VLSI Design (F) [ECE 250L(52L) and ECE 331L(163L)]
- ECE 532(262) Analog Integrated Circuit Design (Sp) [ECE 330(162) or ECE 331L(163L)]
- ECE 534(264) CAD for Mixed-Signal Circuits (F) [ECE 331L(163L)]
The discipline concerned with the interaction of electromagnetic waves with materials. Applications of electromagnetics include microwave circuits (used in satellite communication systems, mobile/cellular radios, aeronautical navigation instruments), optical fiber communication systems, radar (tracking, imaging, guidance), radio astronomy, antennas (single and phased arrays), transmission lines and waveguides. Also, radio frequency (RF) signals and microwaves are used in numerous industrial, scientific and medical applications. These include: RF and microwave induced hyperthermia for cancer therapy, drying, sterilization, thawing and curing of materials (including the cooking of food!).
- ECE 571(271) Electromagnetic Theory (alt F) [ECE 270L(53L)]
- ECE 572(272) Electromagnetic Communication Systems (Sp) [ECE 270L(53L)]
- ECE 573(273) Optical Communication Systems (F) [ECE 270L(53L) & 280L(54L)]
- ECE 575(275) Microwave Electronic Circuits (Sp) [ECE 270L(53L)]
- ECE 577(277) Computational Electromagnetics (F) [ECE 270(53L)]
- ECE 574(279) Waves in Matter (Sp) [ECE 270(53L)]
The discipline concerned with the application of optical and optoelectronic technologies in information science. Photonic applications include information transmission on fiber and free space networks, data storage on disks and volume media, visible and infrared imaging systems, and displays. The Duke photonics program emphasizes hands-on experience with optical systems in communications, sensing, and display applications. Photonic engineering at Duke spans experiences as diverse as logical layer analysis of network protocols over fiber systems, analysis and testing of fiber dispersion, materials studies for optical memory, design of 3D microscopes for biomedical imaging, testing of liquid crystal materials and interfaces, analysis and construction of quantum dynamic systems, and explorations of laser-material and laser-tissue interactions.
- FOUNDATION COURSE - ECE 340L(122L) Optics & Photonics (F) [ECE 270L(53L)]
- ECE 449(135) Opto-Electronic Design Projects (Sp) [ECE 230L(51L) and Junior or Senior standing in ECE or EE]
- ECE 496(196) Applications of Photonic Devices (Sp09)
- ECE 545(225) Nanophotonics (Sp) [ECE 270L(53L)]
- ECE 546(226) Optoelectronic Devices for Optical Fiber Networks (F) [ECE 526(216)]
- ECE 523(227)/PHYSICS 627(272) Quantum Information Science (alt Sp) [ECE 521(211) or PHYSICS 464(211), or equivalent] (Note the similar but different ECE and PHYSICS course numbers!)
- ECE 573(273) Optical Communication Systems (F) [ECE 230L(53L) & 280L(54L)]